Price: $53.99
(as of Sep 30, 2026 17:50:19 UTC – Details)
Product description
On/Off Switch & Automatically Sensor Topgreener In Wall PIR Motion Sensor Light Switch
A simple yet effective way to add light automation. This innovative device combines an occupancy sensor with an always-on switch, allowing for seamless lighting control. Enhance your home with the TSOS5 Motion Sensor Switch
Occupancy Sensor
Automatically Turns Lights ON and OFF
By sensing the difference between heat emitted from the human body in motion and background space.
For garages, closets
The Lights Will Remain On
Ideal for use in garages, and other areas that necessitate continuous and precise operation.
Perfect for Studios
Suitable for multimedia environment
The light will not illuminate automatically whether or not the PIR sensor is activated.
1 Auto ON/OFF
2 Always On Mode
3 Always OFF Mode
Single-Pole Passive Infrared Motion Sensor Switch
This occupancy sensor has a 180-degree field of view; the sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage within a space, motion-activated sensors and variable delay time between 15 seconds, 10 minutes, 20 minutes, and 30 minutes. Neutral wire required.
1
2
3
4
5
Perfect for Ventilators
Ideal for Locations with Turbulent Exhaust Airflow
Expanding automation beyond just lighting. Particularly for use in damp and airtight basements.
Ground Wire Required
Ideal for the Home built after the mid-80s
The devices require a neutral wire, enhancing the devices’ performance and stability.
Switch the Auto & Manual
The Manual Switch Overrides the Motion Sensor
The manual switch takes precedence over the motion sensor in controlling the device.
Perefect for Pantries
Single-Pole Control
Ideal for environments with limited space and minimal windows or glass.
1 Fan Control
2 Neutral Wire Required
3 Sensor Override
4 Single-Pole
Auto Mode
Mind Knowing That Your Lights Will Always Turn OFF
Providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine.
Easy to Located
Automatically ON When Load is Off
Avoid fumbling in the dark or entering a room with your hands full searching for the light switch.
Coverage Area 980 sq. ft
Thus Enhancing the Detection of Small Movements
Perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
1 Hands-Free
2 LED Indicator
3 Easy to Install
4-Wire PIR Motion Sensor: Wiring Requirements
1. Sensor wired but not working?
The two most common causes are:
Cause 1: Reversed Hot/Load. Our sensor has polarity. Your original switch might not. The Hot and Load wires must be correct. Cause 2: Misidentified Wires. The Previous installation may not have distinguished Hot from Load. Always use a voltage tester to confirm the Hot wire. Do not trust wire colors alone.
2. KNOB Button
KNOB timer: The pointer must be turned to align exactly with one of the numbered time settings (15s, 10min, 20 min, 30min). If left between two numbers, the timer will not activate. It offers preset timing options only.
KNOB Range: The knob can be set to any position within its range. This allows you to fine-tune the delay time for specific room conditions, such as room size and ambient light.
3. NEUTRAL WIRE MANDATORY This device will ABSOLUTELY NOT function without a neutral wire connection.
TOPGREENER PIR Motion Sensor Selections
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.3 out of 5 stars 3,139
4.2 out of 5 stars 1,883
4.3 out of 5 stars 1,880
3.9 out of 5 stars 214
4.1 out of 5 stars 138
4.3 out of 5 stars 1,528
Price
$18.99$18.99
$28.99$28.99
$27.99$27.99
$32.99$32.99
$39.89$39.89
$27.99$27.99
Circuits
Lights
Lights
Lights
Lights
Lights
Lights
PIR Motion Sensor Provided For
Auto ON/OFF
Auto ON/OFF
Auto ON/OFF
Auto ON/OFF
Auto ON/OFF
Auto ON/OFF
Time Delay Effective Position
15s, & 10, 20, 30 Mins
15s, & 10, 20, 30 Mins
15s, & 10, 20, 30 Mins
15s, & 10, 20, 30 Mins
15s, & 5, 10, 15, 20, 30 Mins
15s, & 10, 20, 30 Mins
Neutral Wire Required
✔
✘
✘
✘
✘
✔
GrounB08R364D94ire Required
✔
✘
✔
✔
✔
✔
Feature
Manual ON/OFF
Simply Replace the Switch
For built before the mid-80s
OCCD/OCCS/VACD
Dimmer Function
More stable, less interference
Warm-Up Required
No
Yes, 1-2 Mins
Yes, 1-2 Mins
Yes, 1-2 MinsB078SKS6LS
Yes, 1-2 Mins
No
𝐍𝐞𝐞𝐝 𝐍𝐞𝐮𝐭𝐫𝐚𝐥 𝐖𝐢𝐫𝐞. 4-pack motion sensor switches automatically turn lights, fans, and motors on/off based on the occupancy and vacancy detected in a room. Wall Plate Included.
𝐒𝐢𝐧𝐠𝐥𝐞 𝐏𝐨𝐥𝐞 𝐮𝐬𝐞 𝐨𝐧𝐥𝐲, Not suitable for 3 way or multiple way. AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
Max sensor coverage area 707 sq ft, 180º field of view. Motion sensor wall switch features adjustable range and sensitivity from 30% to 100%
Occupancy sensor light switch variable time delay: 𝟏𝟓 𝐬𝐞𝐜 (𝐭𝐞𝐬𝐭 𝐦𝐨𝐝𝐞), 𝟏𝟎 𝐦𝐢𝐧, 𝟐𝟎 𝐦𝐢𝐧, 𝟑𝟎 𝐦𝐢𝐧. If the device does not work after installaton, please contact our support team
Black, 120VAC; CFL/LED: 150W; Incandescent/Halogen: 500W; Motor: 1/8 HP; Fluorescent 500VA, Wall Plate Included. Enjoy a 3-year warranty and full installation support.
